Dear Otavio Salvador, > On Sun, Apr 28, 2013 at 3:39 PM, Marek Vasut <ma...@denx.de> wrote: > > The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, > > otherwise they have issues with out-of-tree build where elftosb tool > > couldn't sometimes find the u-boot.bin and spl/u-boot-spl.bin . > > > > Preprocess these .bd files with sed and insert full path to u-boot.bin > > and spl/u-boot-spl.bin to prevent this issue. Moreover, to avoid adding > > more churn into main Makefile, move all this preprocessing and u-boot.sb > > generation into CPU directory instead. > > > > Signed-off-by: Marek Vasut <ma...@denx.de> > > Cc: Fabio Estevam <fabio.este...@freescale.com> > > Cc: Stefano Babic <sba...@denx.de> > > Please Cc me in 'mxs' patches. > > > Makefile | 7 ++----- > > arch/arm/cpu/arm926ejs/mxs/Makefile | 10 ++++++++++ > > arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 4 ++-- > > arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 4 ++-- > > As you'll be processing this '.bd' files with sed, I think naming the > u-boot.imx2[38].bd.in could make it easier to understand when someone > not familiar with the code looks at it.
Not really, just keep them as they were. > Just due curiosity how did you find it failed? I did try to build it > with out-of-tree using MAKEALL and had no issues. Is it reproducable > with higher number of parallel tasks? Not sure anymore, I had this fix on my todo so I did it. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
