Hi Tom, On Mon, 8 Apr 2013 12:33:36 -0400, Tom Rini <tr...@ti.com> wrote:
> Hello, > > The following changes since commit 8bf3c322856f42d4db8acd7fa4f2a17898564064: > > logo: update to the new logo for ATMEL (2013-04-05 21:49:37 +0200) > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > for you to fetch changes up to dd2445ec1b839a5ca61ff8438a5b7aebb21b7986: > > omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE (2013-04-08 11:40:59 > -0400) > > ---------------------------------------------------------------- > Andreas Bießmann (6): > omap3/cpu.h: add BCH support > asm/omap_gpmc.h: consolidate common defines > omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel > omap_gpmc: change nandecc command > omap_gpmc: add support for hw assisted BCH8 > tricorder: enable hw assisted BCH8 in SPL and u-boot > > Bin Liu (2): > musb: am335x: disable bulk split-combine feature > musb: set MUSB speed based on CONFIG > > Hunter, Jon (4): > omap2420-h4: Fix DRAM initialisation > omap2420-h4: Fix booting from NOR flash > omap2420-h4: Add device tree support > omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ > > Lars Poeschel (1): > pcm051: Enable DDR PHY dynamic power down bit > > Lokesh Vutla (1): > arm: omap4: Fix SDRAM AUTO DETECTION > > Lubomir Popov (1): > OMAP: Fix copy-paste bug that did not enable UART4 clock > > Manfred Huber (1): > omap3_beagle: Flush UART3 xmit on enable if TEMT is broken > > Nishanth Menon (1): > omap5: Allow use of a plain text env file > > SRICHARAN R (4): > ARM: OMAP5: Rename omap5_evm to omap5_uevm > ARM: OMAP5: Set fdt_high to enable booting with Device tree > ARM: OMAP4/5: Change the default boot command to work with device tree > ARM: OMAP4/5: Make bootz as the default boot command > > Tom Rini (5): > am335x: Enable MMC1 clock > doc/feature-removal-schedule.txt: Add > CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL > OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC > omap5_uevm.h: Move uEVM-specific choices to omap5_uevm.h > omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE > > README | 8 - > arch/arm/cpu/arm1136/omap24xx/timer.c | 8 +- > arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 5 + > arch/arm/cpu/armv7/am33xx/elm.c | 2 +- > arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 +- > arch/arm/cpu/armv7/omap-common/emif-common.c | 29 +- > arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +- > arch/arm/cpu/armv7/omap3/board.c | 31 +- > arch/arm/cpu/armv7/omap4/emif.c | 1 - > arch/arm/cpu/armv7/omap5/emif.c | 1 - > arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 58 +--- > arch/arm/include/asm/arch-am33xx/spl.h | 3 + > arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 +- > arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +- > arch/arm/include/asm/arch-omap3/cpu.h | 6 + > arch/arm/include/asm/arch-omap3/omap_gpmc.h | 68 +--- > arch/arm/include/asm/arch-omap3/spl.h | 3 + > arch/arm/include/asm/arch-omap3/sys_proto.h | 2 +- > arch/arm/include/asm/arch-omap4/omap.h | 1 - > arch/arm/include/asm/arch-omap4/spl.h | 2 + > arch/arm/include/asm/arch-omap5/omap.h | 1 - > arch/arm/include/asm/arch-omap5/spl.h | 2 + > arch/arm/include/asm/emif.h | 1 - > arch/arm/include/asm/omap_gpmc.h | 87 +++++ > board/isee/igep00x0/igep00x0.c | 2 +- > board/overo/overo.c | 2 +- > board/phytec/pcm051/board.c | 3 +- > board/ti/omap2420h4/config.mk | 4 +- > board/ti/omap2420h4/mem.c | 13 - > board/ti/omap2420h4/omap2420h4.c | 24 +- > board/ti/{omap5_evm => omap5_uevm}/Makefile | 0 > board/ti/{omap5_evm => omap5_uevm}/evm.c | 0 > board/ti/{omap5_evm => omap5_uevm}/mux_data.h | 0 > boards.cfg | 2 +- > doc/README.omap3 | 28 ++ > doc/feature-removal-schedule.txt | 16 + > drivers/mtd/nand/omap_gpmc.c | 424 > +++++++++++++++++------- > drivers/serial/ns16550.c | 18 +- > drivers/usb/musb-new/musb_core.c | 7 + > drivers/usb/musb-new/musb_uboot.c | 2 +- > include/configs/am335x_evm.h | 1 + > include/configs/dra7xx_evm.h | 2 + > include/configs/igep00x0.h | 3 - > include/configs/omap2420h4.h | 5 +- > include/configs/omap4_common.h | 22 +- > include/configs/omap5_common.h | 51 ++- > include/configs/{omap5_evm.h => omap5_uevm.h} | 18 + > include/configs/tricorder.h | 13 +- > lib/Makefile | 2 +- > 49 files changed, 672 insertions(+), 331 deletions(-) > create mode 100644 arch/arm/include/asm/omap_gpmc.h > rename board/ti/{omap5_evm => omap5_uevm}/Makefile (100%) > rename board/ti/{omap5_evm => omap5_uevm}/evm.c (100%) > rename board/ti/{omap5_evm => omap5_uevm}/mux_data.h (100%) > rename include/configs/{omap5_evm.h => omap5_uevm.h} (70%) > > Andreas' changes came well before the merge window, Everything else is a > bugfix of some sort or another or part of keeping platforms still useful > with later kernel releases. > Applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot