On 02/04/13 17:41, Otavio Salvador wrote:
On Tue, Apr 2, 2013 at 12:38 PM, Adnan Ali <adnan....@codethink.co.uk> wrote:
On 02/04/13 16:19, Robert Nelson wrote:
On Tue, Apr 2, 2013 at 9:17 AM, Adnan Ali <adnan....@codethink.co.uk>
wrote:
Enable btrfs support in mx53loco config
Signed-off-by: Adnan Ali <adnan....@codethink.co.uk>
---
include/configs/mx53loco.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index a4b610f..62e9a76 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -56,6 +56,8 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_BTR
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_DOS_PARTITION
/* Eth Configs */
@@ -128,7 +130,7 @@
"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
"mmcargs=setenv bootargs console=ttymxc0,${baudrate}
root=${mmcroot}\0" \
"loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
${script};\0" \
+ "btrload mmc ${mmcdev}:${mmcpart} ${loadaddr}
${script};\0" \
Instead of changing this to btrload for everyone, wouldn't it make
more sense to use the generic "load" command? As your already setting
"CONFIG_CMD_FS_GENERIC"
Well idea of adding that was to enable btrfs and to show its associated
commands.
Yes you can use generic 'load' command. Defaults was using fatload so i
change
it to btrload.
If you use the generic load I would be OK in changing it.
I will send this as separate patch. But I leave it until
btrfs patch get accepted. If you are happy with that. ;)
--
Otavio Salvador O.S. Systems
E-mail: ota...@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
