On Tue, Apr 2, 2013 at 12:38 PM, Adnan Ali <adnan....@codethink.co.uk> wrote: > On 02/04/13 16:19, Robert Nelson wrote: >> >> On Tue, Apr 2, 2013 at 9:17 AM, Adnan Ali <adnan....@codethink.co.uk> >> wrote: >>> >>> Enable btrfs support in mx53loco config >>> >>> Signed-off-by: Adnan Ali <adnan....@codethink.co.uk> >>> --- >>> include/configs/mx53loco.h | 4 +++- >>> 1 file changed, 3 insertions(+), 1 deletion(-) >>> >>> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h >>> index a4b610f..62e9a76 100644 >>> --- a/include/configs/mx53loco.h >>> +++ b/include/configs/mx53loco.h >>> @@ -56,6 +56,8 @@ >>> #define CONFIG_GENERIC_MMC >>> #define CONFIG_CMD_FAT >>> #define CONFIG_CMD_EXT2 >>> +#define CONFIG_CMD_BTR >>> +#define CONFIG_CMD_FS_GENERIC >>> #define CONFIG_DOS_PARTITION >>> >>> /* Eth Configs */ >>> @@ -128,7 +130,7 @@ >>> "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ >>> "mmcargs=setenv bootargs console=ttymxc0,${baudrate} >>> root=${mmcroot}\0" \ >>> "loadbootscript=" \ >>> - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} >>> ${script};\0" \ >>> + "btrload mmc ${mmcdev}:${mmcpart} ${loadaddr} >>> ${script};\0" \ >> >> Instead of changing this to btrload for everyone, wouldn't it make >> more sense to use the generic "load" command? As your already setting >> "CONFIG_CMD_FS_GENERIC" > > Well idea of adding that was to enable btrfs and to show its associated > commands. > Yes you can use generic 'load' command. Defaults was using fatload so i > change > it to btrload.
If you use the generic load I would be OK in changing it. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot