Hi Marcio,
On 3/14/2013 20:23, mar...@netopen.com.br wrote:
Hi Bo Shen
I have used a SAMBA old version and I managed to write
the Linux Kernel that can be recognized by U-boot but now it sends a
message "Veritying Checksum ....: Bad Data CRC. It seems that U-Boot is
only reading the first sector OK and the rest of the Kernel is being
worngly read.
Bad Data CRC don't help. Because, many possible issue will cause this issue.
Consider you use 16bit NAND flash. Have you define
CONFIG_SYS_NAND_DBW_16 in board configuration header?
BTW, which bootstrap version do you use? (As I suspect the bootstrap has
enabled for supporting 16bit NAND, so it read u-boot OK)
Please provide the log information output from dbgu.
Thanks for your attention
Marcio
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
