Hello,
On 3/13/2013 20:26, mar...@netopen.com.br wrote:
Hi
Our board reboots after send Wrong Image Format message to the console and
hangs.
How do you do this? what output from console?
The Linux uImage is correctly placed in the NAND 0X200000. The
console input is somehow inhibit. I cannot type anything on it until the
board reboots .
You mean, you can not interactive with u-boot, am I right?
The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek
development kit.
It has only USB, Serial(DBGU), DDR2 and NAND.
I have tried to remove the LCD code but the linker says that printk is
missing.
Please remove LCD related #defined in board configuration header, while
not remove the code.
What the detail message for "printk is missing."
BTW, Which version u-boot do you use?
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
