On Wed, Mar 13, 2013 at 2:14 PM, Hector Palacios <hector.palac...@digi.com> wrote:
> No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not > DENX's m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because > of my phy model KSZ8031, but as I said the pauses and timeouts occur in both > platforms (mx28evk uses a different PHY: SMSC LAN8720a). Just tried adding: #define CONFIG_PHYLIB #define CONFIG_PHY_SMSC but LAN8270 is not getting detected. CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SD/MMC #0, 3V3 I2C: ready DRAM: 128 MiB MMC: MXS MMC: 0 In: serial Out: serial Err: serial Net: Phy not found FEC0 [PRIME], FEC1 Hit any key to stop autoboot: 0 MX28EVK U-Boot > I tried a 50MB tftp transfer here on mx28evk and I do see like 2 or 3 pauses during the transfer. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
