Dear Marek Vasut,
On 03/13/2013 05:52 PM, Marek Vasut wrote:
Dear Hector Palacios,
Dear Marek Vasut,
On 03/13/2013 05:19 PM, Marek Vasut wrote:
Dear Hector Palacios,
Dear Marek Vasut,
On 03/13/2013 11:58 AM, Marek Vasut wrote:
Dear Hector Palacios,
Hello,
When doing large TFTP downloads (files bigger than 10MiB) on my MX28
platform I'm sometimes experiencing pauses and timeouts. U-Boot will
eventually restart the transmission and sometimes may successfully
complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by
reverting this patch from Marek:
commit 67449098a86be18cbdb27345bebe8da57e5d8899
Author: Marek Vasut <ma...@denx.de>
Date: Wed Aug 29 03:49:50 2012 +0000
FEC: Rework the TX wait mechanism
The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try
with 50MiB files or larger. Has anybody else seen it?
On an old U-Boot v2009 TFTP transmission was twice slower than with
v2013, but didn't suffer from this.
What version of u-boot do you use ? It was resolved in recent versions.
I'm using v2013.01.
Could you please point me to the commit(s) that solve it?
The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy
Kisky and don't seem to address this.
commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c
Author: Marek Vasut <ma...@denx.de>
Date: Wed Aug 29 03:49:51 2012 +0000
FEC: Replace magic contants
and the three before this one. Is your PHY operating correctly? This
fixed the hangs on multiple MX28 platforms for me.
v2013.01 contains all these patches but I was able to reproduce this both
on my platform and on the mx28evk.
My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:
#################################################################
#####################################################T T T T T T
At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see
it on mx28evk.
Do you use PHYLIB (see configs/sc_sps_1.h for example)? Also check if your
transceiver mode is not misconfigured. Moreover, see
board/denx/m28evk/spl_boot.c fecmxc_mii_postcall(), maybe you also need to
program some registers of the PHY (V11 and V10 prototypes used KSZ8051)?
No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not DENX's
m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because of my phy model
KSZ8031, but as I said the pauses and timeouts occur in both platforms (mx28evk uses a
different PHY: SMSC LAN8720a).
Are you able to download a 50MiB file via TFTP several times without any problem on
m28evk?
Best regards,
--
Héctor Palacios
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
