This patchset adds SDMMC device-tree support to the Tegra114 dts files,
and enables the Tegra MMC driver on Tegra114 Dalmore.
Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load
a kernel off of a SD card OK, card detect works, and the env is now
stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).
Tom Warren (4):
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for
now)
Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
Tegra114: MMC: Add SD bus power-rail init routine
Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
boards
arch/arm/dts/tegra114.dtsi | 32 +++++++++
arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 7 ++
board/nvidia/dalmore/dalmore.c | 79 +++++++++++++++++++++++
board/nvidia/dalmore/pinmux-config-dalmore.h | 2 +
board/nvidia/dts/tegra114-dalmore.dts | 13 ++++
include/configs/dalmore.h | 12 +++-
6 files changed, 144 insertions(+), 1 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
