Hi David,
On 06.02.2013 22:18, David Andrey wrote:
> Add support for Micrel PHY KSZ9031 in phylib,
> including small rework for KSZ9021 to avoid
> code duplication
>
> Signed-off-by: David Andrey <david.and...@netmodule.com>
> Cc: Troy Kisky <troy.ki...@boundarydevices.com>
> Cc: Joe Herschberger <joe.hershber...@gmail.com>
> Cc: Andy Fleming <aflem...@freescale.com>
>
> ---
>
> Changes for v2:
> - Same startup function for KSZ9021 and 9031
> ---
> drivers/net/phy/micrel.c | 79
> ++++++++++++++++++++++++++++++----------------
> 1 files changed, 52 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 30f3264..2a8b6cb 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -18,6 +18,7 @@
> *
> * Copyright 2010-2011 Freescale Semiconductor, Inc.
> * author Andy Fleming
> + * (C) 2012 NetModule AG, David Andrey, added KSZ9031
> *
> */
> #include <config.h>
> @@ -52,16 +53,46 @@ static struct phy_driver KS8721_driver = {
> };
> #endif
>
> +
> +/**
> + * KSZ9021 - KSZ9031 common
> + */
> +
> +#define MII_KSZ90xx_PHY_CTL 0x1f
> +#define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6)
> +#define MIIM_KSZ90xx_PHYCTL_100 (1 << 5)
> +#define MIIM_KSZ90xx_PHYCTL_10 (1 << 4)
> +#define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3)
> +
> +static int ksz90xx_startup(struct phy_device *phydev)
> +{
> + unsigned phy_ctl;
> + genphy_update_link(phydev);
> + phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL);
> +
> + if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX)
> + phydev->duplex = DUPLEX_FULL;
> + else
> + phydev->duplex = DUPLEX_HALF;
> +
> + if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000)
> + phydev->speed = SPEED_1000;
> + else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100)
> + phydev->speed = SPEED_100;
> + else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10)
> + phydev->speed = SPEED_10;
> + return 0;
> +}
> #ifdef CONFIG_PHY_MICREL_KSZ9021
> -/* ksz9021 PHY Registers */
> +
> +/*
> + * KSZ9021
> + */
> +
> +/* PHY Registers */
> #define MII_KSZ9021_EXTENDED_CTRL 0x0b
> #define MII_KSZ9021_EXTENDED_DATAW 0x0c
> #define MII_KSZ9021_EXTENDED_DATAR 0x0d
> -#define MII_KSZ9021_PHY_CTL 0x1f
> -#define MIIM_KSZ9021_PHYCTL_1000 (1 << 6)
> -#define MIIM_KSZ9021_PHYCTL_100 (1 << 5)
> -#define MIIM_KSZ9021_PHYCTL_10 (1 << 4)
> -#define MIIM_KSZ9021_PHYCTL_DUPLEX (1 << 3)
>
> #define CTRL1000_PREFER_MASTER (1 << 10)
> #define CTRL1000_CONFIG_MASTER (1 << 11)
> @@ -106,37 +137,30 @@ static int ksz9021_config(struct phy_device *phydev)
> return 0;
> }
>
> -static int ksz9021_startup(struct phy_device *phydev)
> -{
> - unsigned phy_ctl;
> - genphy_update_link(phydev);
> - phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_PHY_CTL);
> -
> - if (phy_ctl & MIIM_KSZ9021_PHYCTL_DUPLEX)
> - phydev->duplex = DUPLEX_FULL;
> - else
> - phydev->duplex = DUPLEX_HALF;
> -
> - if (phy_ctl & MIIM_KSZ9021_PHYCTL_1000)
> - phydev->speed = SPEED_1000;
> - else if (phy_ctl & MIIM_KSZ9021_PHYCTL_100)
> - phydev->speed = SPEED_100;
> - else if (phy_ctl & MIIM_KSZ9021_PHYCTL_10)
> - phydev->speed = SPEED_10;
> - return 0;
> -}
> -
> static struct phy_driver ksz9021_driver = {
> .name = "Micrel ksz9021",
> .uid = 0x221610,
> .mask = 0xfffff0,
Why don't you just change the mask to support both PHY's with one struct
here? Something like this:
static struct phy_driver ksz9021_driver = {
- .name = "Micrel ksz9021",
+ .name = "Micrel ksz90x1",
.uid = 0x221610,
- .mask = 0xfffff0,
+ .mask = 0xffffc0,
This would be much "simpler". Does it work for you?
Best regards,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: off...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
