Hi Benoît, On Tue, Feb 26, 2013 at 10:35 AM, Fabio Estevam <feste...@gmail.com> wrote:
> Yes, after using the same IOMUX from FSL U-boot I get: > > NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB > 3,3) > NAND bus width 16 instead 8 bit > No NAND device found!!! > 0 MiB This should be fixed separetely and it is not related to your patch. I will submit a patch for this 16-bit detection issue I was able to read and write to NAND, I have also tested to save env vars into NAND and it works fine. So, after changing the IOMUX as per FSL U-boot you can add my: Tested-by: Fabio Estevam <fabio.este...@freescale.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
