Hi Benoit, On Fri, Feb 15, 2013 at 6:54 PM, Benoît Thébaudeau <benoit.thebaud...@advansee.com> wrote: > Add support for the Samsung K9LAG08U0M NAND Flash (2-GiB MLC NAND Flash, 2-kiB > pages, 256-kiB blocks, 30-ns R/W cycles, 1 CS) on mx53ard. > > eNFC_CLK_ROOT is set up with a cycle time of 37.5 ns (400 MHz / 3 / 5) for > this > board, which satisfies the 30-ns NF R/W cycle requirement. > > Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
NAND is not detected on my mx53ard. I think we need to adjust the IOMUX as per: http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/board/freescale/mx53_ard/mx53_ard.c?h=imx_v2009.08 Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
