Hello Bo Shen, On Mon, 2013-02-18 at 11:06 +0800, Bo Shen wrote: > Hi John, > > On 02/16/2013 12:45 AM, John Stile wrote: > > I am trying to move from uboot-1.3.6 to uboot 2013.01, where the old > > works, the new prints this before freezing: > > > > U-Boot 2013.01 (Feb 14 2013 - 16:24:13) > > > > CPU: AT91SAM9G20 > > Crystal frequency: 18.432 MHz > > CPU clock : 396.288 MHz > > Master clock : 132.096 MHz > > > > My board is the at91sam9g20ek_2mmc. > > at91bootstrap-1.1.6 loads uboot. > > Please update the at91bootstrap to new version. > You can get the it from: git://github.com/linux4sam/at91bootstrap.git > using tag: v3.5.2 > or master branch > > For new bootstrap, the memory map for NAND flash has changed. More > information: > http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_Memory > > So, you need flash u-boot to 0x40000 address, and change u-boot env as > the memory map (I will send patches for this later). > > Best Regards, > Bo Shen > > > I am trying both nandflash and dataflash versions, using > > include/configs/at91sam9260ek.h > > > > Messing with settings I have got it back to a state of not printing > > anything.
I was wrong. it isn't a timing issue. In at91boostrap, I specified the wrong IMG_SIZE, and specifying the correct size solved the problem. I had only copied part of the binary to SDRAM, which lead to the program sometimes showing the initial banner before crashing. In my situation, I use buildroot-2011.11, which downloads at91boostrap from: ftp://www.at91.com/pub/at91bootstrap/ version AT91Bootstrap1.16.zip, and though updates are the available I have modified my st91boostrap and uboot, so upgrades are not so simple. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot