Hi John,
On 02/16/2013 12:45 AM, John Stile wrote:
I am trying to move from uboot-1.3.6 to uboot 2013.01, where the old
works, the new prints this before freezing:
U-Boot 2013.01 (Feb 14 2013 - 16:24:13)
CPU: AT91SAM9G20
Crystal frequency: 18.432 MHz
CPU clock : 396.288 MHz
Master clock : 132.096 MHz
My board is the at91sam9g20ek_2mmc.
at91bootstrap-1.1.6 loads uboot.
Please update the at91bootstrap to new version.
You can get the it from: git://github.com/linux4sam/at91bootstrap.git
using tag: v3.5.2
or master branch
For new bootstrap, the memory map for NAND flash has changed. More
information:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_Memory
So, you need flash u-boot to 0x40000 address, and change u-boot env as
the memory map (I will send patches for this later).
Best Regards,
Bo Shen
I am trying both nandflash and dataflash versions, using
include/configs/at91sam9260ek.h
Messing with settings I have got it back to a state of not printing
anything.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
