> -----Original Message----- > From: Sebastian Hesselbarth [mailto:sebastian.hesselba...@gmail.com] > Sent: 17 January 2013 00:55 > To: Sebastian Hesselbarth > Cc: Daniel Stodden; u-boot@lists.denx.de; Rabeeh Khoury; Albert > Aribaud; Prafulla Wadaskar; Andy Fleming; Joe Hershberger; Luka Perkov > Subject: [PATCH v3 10/10] tools: Add support for Dove to kwboot > > On Dove kwboot can also be used to boot an u-boot image into RAM. > In contrast to Kirkwood, Dove does not support the UART boot mode > sequence but requires the UART boot mode to be selected through > strap pins. The SolidRun CuBox has a push button to allow uart > boot mode but fails on the boot sequence sent by kwboot. > > This patch adds another cmdline option to allow to send a boot > image without the boot sequence and adds support for Dove. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com> > Signed-off-by: Daniel Stodden <daniel.stod...@gmail.com> > --- > Cc: u-boot@lists.denx.de > Cc: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com> > Cc: Rabeeh Khoury <rab...@solid-run.com> > Cc: Albert Aribaud <albert.u.b...@aribaud.net> > Cc: Prafulla Wadaskar <prafu...@marvell.com> > Cc: Andy Fleming <aflem...@gmail.com> > Cc: Joe Hershberger <joe.hershber...@gmail.com> > Cc: Daniel Stodden <daniel.stod...@gmail.com> > Cc: Luka Perkov <l...@openwrt.org> > --- > doc/kwboot.1 | 13 ++++++++++--- > tools/Makefile | 2 ++ > tools/kwboot.c | 25 +++++++++++++++++++------ > 3 files changed, 31 insertions(+), 9 deletions(-) > > diff --git a/doc/kwboot.1 b/doc/kwboot.1 > index 25fe69a..ab4551b 100644 > --- a/doc/kwboot.1 > +++ b/doc/kwboot.1 > @@ -1,17 +1,18 @@ > -.TH KWBOOT 1 "2012-05-19" > +.TH KWBOOT 1 "2013-01-16" > > .SH NAME > -kwboot \- Boot Marvell Kirkwood SoCs over a serial link. > +kwboot \- Boot Marvell Kirkwood/Dove SoCs over a serial link. > .SH SYNOPSIS > .B kwboot > .RB [ "-b \fIimage\fP" ] > +.RB [ "-n" ] > .RB [ "-p" ] > .RB [ "-t" ] > .RB [ "-B \fIbaudrate\fP" ] > .RB \fITTY\fP > .SH "DESCRIPTION" > > -The \fBmkimage\fP program boots boards based on Marvell's Kirkwood > +The \fBmkimage\fP program boots boards based on Marvell's > Kirkwood/Dove > platform over their integrated UART. Boot image files will typically > contain a second stage boot loader, such as U-Boot. The image file > must conform to Marvell's BootROM firmware image format > @@ -68,6 +69,12 @@ If standard I/O streams connect to a console, this > mode will terminate > after receiving 'ctrl-\\' followed by 'c' from console input. > > .TP > +.BI "\-u" > +Disables the UART boot mode sequence for platforms that do not > support > +it (e.g. Dove). Usually, the UART boot mode must be selected by > pressing > +a push button on power-up. > + > +.TP > .BI "\-B \fIbaudrate\fP" > Adjust the baud rate on \fITTY\fP. Default rate is 115200. > > diff --git a/tools/Makefile b/tools/Makefile > index 686840a..4816812 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) > BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) > BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) > BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) > +BIN_FILES-$(CONFIG_DOVE) += kwboot$(SFX) > BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX) > > # Source files which exist outside the tools directory > @@ -103,6 +104,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o > NOPED_OBJ_FILES-y += os_support.o > OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o > NOPED_OBJ_FILES-y += ublimage.o > +OBJ_FILES-$(CONFIG_DOVE) += kwboot.o > OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o > > # Don't build by default > diff --git a/tools/kwboot.c b/tools/kwboot.c > index e773f01..1e4edb6 100644 > --- a/tools/kwboot.c > +++ b/tools/kwboot.c > @@ -37,6 +37,10 @@ static unsigned char kwboot_msg_boot[] = { > 0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 > }; > > +static unsigned char kwboot_msg_none[] = { > + 0x00 > +}; > + > #define KWBOOT_MSG_REQ_DELAY 10 /* ms */ > #define KWBOOT_MSG_RSP_TIMEO 50 /* ms */ > > @@ -268,17 +272,21 @@ kwboot_bootmsg(int tty, void *msg) > int rc; > char c; > > - kwboot_printv("Sending boot message. Please reboot the > target..."); > + kwboot_printv(msg != kwboot_msg_none > + ? "Sending boot message. Please reboot the target..." > + : "Sensing target. Please reboot target into UART mode..."); > > do { > rc = tcflush(tty, TCIOFLUSH); > if (rc) > break; > > - rc = kwboot_tty_send(tty, msg, 8); > - if (rc) { > - usleep(KWBOOT_MSG_REQ_DELAY * 1000); > - continue; > + if (msg != kwboot_msg_none) { > + rc = kwboot_tty_send(tty, msg, 8); > + if (rc) { > + usleep(KWBOOT_MSG_REQ_DELAY * 1000); > + continue; > + } > } > > rc = kwboot_tty_recv(tty, &c, 1, KWBOOT_MSG_RSP_TIMEO); > @@ -607,6 +615,7 @@ kwboot_usage(FILE *stream, char *progname) > fprintf(stream, " -b <image>: boot <image>\n"); > fprintf(stream, " -p: patch <image> to type 0x69 (uart boot)\n"); > fprintf(stream, "\n"); > + fprintf(stream, " -n: don't send boot message\n"); > fprintf(stream, " -t: mini terminal\n"); > fprintf(stream, "\n"); > fprintf(stream, " -B <baud>: set baud rate\n"); > @@ -636,7 +645,7 @@ main(int argc, char **argv) > kwboot_verbose = isatty(STDOUT_FILENO); > > do { > - int c = getopt(argc, argv, "hb:ptB:"); > + int c = getopt(argc, argv, "hb:nptB:"); > if (c < 0) > break; > > @@ -646,6 +655,10 @@ main(int argc, char **argv) > imgpath = optarg; > break; > > + case 'n': > + bootmsg = kwboot_msg_none; > + break; > + > case 'p': > patch = 1; > break; > -- > 1.7.10.4
Acked-By: Prafulla Wadaskar <prafu...@marvell.com> Regards... Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
