On Mon, Jan 28, 2013 at 1:18 PM, Marek Vasut <ma...@denx.de> wrote:
> Dear Otavio Salvador,
>
>> On Mon, Jan 28, 2013 at 1:10 PM, Marek Vasut <ma...@denx.de> wrote:
>> > Dear Otavio Salvador,
>> >
>> > [..]
>> >
>> >> /*
>> >>
>> >> + * Status LED
>> >> + */
>> >> +#define CONFIG_STATUS_LED
>> >> +#define CONFIG_GPIO_LED
>> >> +#define CONFIG_BOARD_SPECIFIC_LED
>> >> +#define STATUS_LED_BOOT 0
>> >> +#define STATUS_LED_BIT 0x030a /* MX23_PAD_SSP1_DETECT__GPIO_2_1
>> >> */
>> >
>> > Just use MX23_PAD_SSP1_DETECT__GPIO_2_1 directly ?
>>
>> make[1]: Nothing to be done for `all'.
>> make[1]: Leaving directory `/home/otavio/hacking/u-boot/drivers/mtd/spi'
>> status_led.c:46:7: error: 'MX23_PAD_SSP1_DETECT__GPIO_2_1' undeclared
>> here (not in a function)
>
> #include iomux-mx23 missing ?
...
make[1]: Entering directory `/home/otavio/hacking/u-boot/tools'
/home/otavio/hacking/u-boot/include/asm/arch/iomux.h: Assembler messages:
/home/otavio/hacking/u-boot/include/asm/arch/iomux.h:38: Error: bad
instruction `typedef u32 iomux_cfg_t'
/home/otavio/hacking/u-boot/include/asm/arch/iomux.h:112: Error: bad
instruction `static inline unsigned int PAD_BANK(iomux_cfg_t pad)'
/home/otavio/hacking/u-boot/include/asm/arch/iomux.h:113: Error: junk
at end of line, first unrecognized character is `{'
/home/otavio/hacking/u-boot/include/asm/arch/iomux.h:114: Error: bad
instruction `return (pad&((iomux_cfg_t)0x7<<0))>>0'
...
I had try it before of course ;)
--
Otavio Salvador O.S. Systems
E-mail: ota...@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
