This code was targetting one specific Microblaze platform
configuration which is obsolete and fsl bus isn't used
in this way.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
.../xilinx/microblaze-generic/microblaze-generic.c | 20 --------------------
include/configs/microblaze-generic.h | 4 ----
2 files changed, 0 insertions(+), 24 deletions(-)
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c
b/board/xilinx/microblaze-generic/microblaze-generic.c
index b75e62c..70f94c1 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -53,29 +53,9 @@ int gpio_init (void)
return 0;
}
-#ifdef CONFIG_SYS_FSL_2
-void fsl_isr2 (void *arg) {
- volatile int num;
- *((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) =
- ++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)));
- GET (num, 2);
- NGET (num, 2);
- puts("*");
-}
-
-int fsl_init2 (void) {
- puts("fsl_init2\n");
- install_interrupt_handler (FSL_INTR_2, fsl_isr2, NULL);
- return 0;
-}
-#endif
-
void board_init(void)
{
gpio_init();
-#ifdef CONFIG_SYS_FSL_2
- fsl_init2();
-#endif
}
int board_eth_init(bd_t *bis)
diff --git a/include/configs/microblaze-generic.h
b/include/configs/microblaze-generic.h
index eed38c1..d172e56 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -120,10 +120,6 @@
# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
#endif
-/* FSL */
-/* #define CONFIG_SYS_FSL_2 */
-/* #define FSL_INTR_2 1 */
-
/*
* memory layout - Example
* CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
