On 01/15/2013 08:39:38 PM, Shaohui Xie wrote:
Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
---
boards.cfg | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index e4b0d44..8cf4936 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -855,6 +855,7 @@ P5020DS_SECURE_BOOT powerpc
mpc85xx corenet_ds freesca
P5020DS_SPIFLASH powerpc mpc85xx
corenet_ds freescale -
P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P5020DS_SRIO_PCIE_BOOT powerpc mpc85xx
corenet_ds freescale -
P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
P5040DS powerpc mpc85xx
corenet_ds freescale
+P5040DS_NAND powerpc mpc85xx
corenet_ds freescale -
P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
BSC9131RDB_SPIFLASH powerpc mpc85xx
bsc9131rdb freescale -
BSC9131RDB:BSC9131RDB,SPIFLASH
stxgp3 powerpc mpc85xx
stxgp3 stx
stxssa powerpc mpc85xx
stxssa stx - stxssa
This needs more explanation. What sort of image am I supposed to get
when I build "P5040DS_NAND"? Where is the PBI?
What is the long-term plan for fixing the problem of the environment
not being available until after relocation? With SPL we could use
CONFIG_NAND_ENV_DST (which has some issues, but they're fixable).
It would also be nice to include instructions for configuring the board
to boot from NAND in a README (Freescale's user manuals often do not
make this clear, especially for soft configuration). Also please
provide a built-in command (or script in the default environment) to
soft-boot into NAND (or if it already exists, please document it).
-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
