On 11/01/13 19:10, Rajeshwari Birje wrote: > Hi Minkyu Kang, > > Thank you for comments. > > On Fri, Jan 11, 2013 at 1:24 PM, Minkyu Kang <mk7.k...@samsung.com> wrote: >> Dear Rajeshwari, >> >> On 07/01/13 22:08, Rajeshwari Shinde wrote: >>> This patch converts lowlevel_init.S to lowlevel_init_c.c for >>> SMDK5250. >>> Lowlevel.S as of now added only for SMDK5250 and same can be >>> extended to other SOC in future. >>> >>> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com> >>> --- >>> Changes in V2: >>> - Renamed lowlevel_init.S to lowlevel.S and moved to >>> arch/arm/cpu/armv7/exynos/ >>> - Moved power mode defines to power.h >>> - Added early serial support. >>> - Renamed mem_reset to reset. >>> arch/arm/cpu/armv7/exynos/Makefile | 6 ++ >>> arch/arm/cpu/armv7/exynos/lowlevel.S | 35 ++++++++ >>> arch/arm/include/asm/arch-exynos/power.h | 8 ++ >>> board/samsung/smdk5250/Makefile | 2 +- >>> board/samsung/smdk5250/dmc_common.c | 4 +- >>> board/samsung/smdk5250/dmc_init_ddr3.c | 6 +- >>> board/samsung/smdk5250/lowlevel_init.S | 96 -------------------- >>> board/samsung/smdk5250/lowlevel_init.c | 81 +++++++++++++++++ >>> board/samsung/smdk5250/setup.h | 19 ++++- >>> board/samsung/smdk5250/spl_boot.c | 140 >>> +++++++++++++++++++++++++++-- >>> spl/Makefile | 4 + >>> 11 files changed, 288 insertions(+), 113 deletions(-) >>> create mode 100644 arch/arm/cpu/armv7/exynos/lowlevel.S >>> delete mode 100644 board/samsung/smdk5250/lowlevel_init.S >>> create mode 100644 board/samsung/smdk5250/lowlevel_init.c >>> >>> diff --git a/arch/arm/cpu/armv7/exynos/Makefile >>> b/arch/arm/cpu/armv7/exynos/Makefile >>> index 9119961..2aa2722 100644 >>> --- a/arch/arm/cpu/armv7/exynos/Makefile >>> +++ b/arch/arm/cpu/armv7/exynos/Makefile >>> @@ -22,6 +22,12 @@ include $(TOPDIR)/config.mk >>> >>> LIB = $(obj)lib$(SOC).o >>> >>> +ifdef CONFIG_SMDK5250 >> >> Is it SMDK5250 specific? > - Yes, As mentioned in the commit message it is currently been done > only for SMDK5250 and can be also > extended to other SOC in Future. >>
But I think, we don't have to get dependency with the board. Thanks. Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
