Am Samstag 12 Januar 2013, 15:41:54 schrieb Jason: > > Interesting that [1] states it's possible, though... > > With the dreamplug, I often load u-boot into RAM via the JTAG (0x0600000 > and 0x0800000), and then 'resume 0x0600000'. Then use the u-boot > running from 0x0600000 to burn the image to SPI flash from 0x0800000. > But that's loaded via the JTAG, not from a running u-boot.
Yes, I do have a JTAG. And I have used openocd in the past to recover the
plug, so I will try that method.
> I think I posted instructions to this mailinglist a while ago about
> this. If you have the JTAG (it's only $35US), I would advise trying
> that.
Yes, I've seen that, too. However, I've also seen the instructions for doing
it from within u-boot in the link I posted. Since they didn't work I thought
it might be bug. Never thought that it wasn't supported and not supposed to
work at all :)
Bye...
Dirk
--
Dirk Heinrichs <dirk.heinri...@altum.de>
Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
GPG Public Key C2E467BB | Jabber: dirk.heinri...@altum.de
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
