Hello, I have compiled u-boot v2012.10 for my Guruplug and would like to test it from RAM before I write it to flash. So following instructions I found via internet search I load the u-boot.kwb from SATA disk into RAM at address 0x800000 (ext2load ide 0:1 0x800000 u-boot.kwb) and then start it with "go 0x800200".
Unfortunately, this only restarts the running u-boot (v2012.04.01 from Debian)
instead of starting the new one.
So my questions are:
1) Does running from RAM this way work at all?
2) If I can't test it from RAM, is it save to write it to flash anyway?
Thanks...
Dirk
--
Dirk Heinrichs <dirk.heinri...@altum.de>
Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913
GPG Public Key C2E467BB | Jabber: dirk.heinri...@altum.de
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
