On Thu, Jan 10, 2013 at 6:26 PM, Tom Rini <tr...@ti.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 01/10/2013 11:16 AM, Javier Martinez Canillas wrote: >> On Thu, Jan 10, 2013 at 4:35 PM, Tom Rini <tr...@ti.com> wrote: >>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >>> >>> On 01/10/2013 04:43 AM, Javier Martinez Canillas wrote: >>>> On Thu, Dec 27, 2012 at 3:25 PM, Igor Grinberg >>>> <grinb...@compulab.co.il> wrote: >>>>> On 12/27/12 15:36, Javier Martinez Canillas wrote: >>>>>> This patch adds an GPIO LED boot status for IGEP boards. >>>>>> >>>>>> The GPIO LED used is the red LED0 while the Linux kernel >>>>>> uses the green LED0 as the boot status. >>>>>> >>>>>> By using different GPIO LEDs, the user can know in which >>>>>> step of the boot process the board currently is. >>>>>> >>>>>> Signed-off-by: Javier Martinez Canillas >>>>>> <javier.marti...@collabora.co.uk> >>>>> >>>>> Acked-by: Igor Grinberg <grinb...@compulab.co.il> >>>>> >>>> >>>> Hello Tom, >>>> >>>> Any news of merging this patch? >>> >>> Things look good, sorry. I'm going to try and get to starting a >>> next branch but I might not get a chance before the next >>> release. >>> >>> - -- Tom >> >> Great, waiting for the next release is not an issue. >> >> There are also two more patches for IGEP boards that were acked >> but not picked for this release: >> >> [U-Boot,v2,1/2] OMAP3: use a single board file for IGEP devices >> [1] [U-Boot,1/1] OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for >> CONFIG_SPL_NAND_SUPPORT [2] > > For the second path, did SPL+NAND for the IGEP devices get added already? > > - -- > Tom
Yes, it was added on mainline commit d271a6114 "OMAP3: igep00x0: add SPL support for IGEP-based boards" Before posting that patch I only tested SPL booting from the uSD/MMC and later when trying SPL boot from NAND I realized that CONFIG_SPL_BOARD_INIT was missing to initialize the GPMC. Sorry, my bad. I should have tested both MMC and NAND booting before posting the SPL support patch. Thanks a lot and best regards, Javier _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
