Signed-off-by: Vipin Kumar <[email protected]>
---
Makefile | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Makefile b/Makefile
index 8a04727..7f416f4 100644
--- a/Makefile
+++ b/Makefile
@@ -499,6 +499,13 @@ $(obj)u-boot.sb: $(obj)u-boot.bin
$(obj)spl/u-boot-spl.bin
elftosb -zdf $(ELFTOSB_TARGET-y) -c
$(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
-o $(obj)u-boot.sb
+$(obj)spl/u-boot-spl.img: $(obj)spl/u-boot-spl.bin
+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
+ -n $(shell sed -n -e 's/.*U_BOOT_SPL_VERSION//p'
$(VERSION_FILE) | \
+ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
+ -d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
+
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
# bootloader can check its integrity. Padding needs to be done to the
@@ -707,6 +714,9 @@ $(VERSION_FILE):
"$(U_BOOT_VERSION)" "$${localvers}" ; \
printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
"$(U_BOOT_VERSION)" "$${localvers}" ; \
+ printf '#define U_BOOT_SPL_VERSION "%s %s%s"\n' \
+ $(if
$(CONFIG_SPL_IMAGENAME),$(CONFIG_SPL_IMAGENAME),"U-Boot SPL") \
+ "$(U_BOOT_VERSION)" "$${localvers}" ; \
) > [email protected]
@( printf '#define CC_VERSION_STRING "%s"\n' \
'$(shell $(CC) --version | head -n 1)' )>> [email protected]
--
1.8.0
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
