Dear Dmytro, Thank you, with this I was able to rewrite the flash! I now have been able to restore the original boot loader, and I still have interest in developing a bootloader that has additional features, however, with this I believe I can recover the device back to its original configuraration.
Thank you for the source for this, I will attempt to resolve the remaining issues. When I have resolved them, I would be happy to share the results. Allan ________________________________________ From: Dmytro [dioptimi...@gmail.com] Sent: Monday, December 03, 2012 01:28 To: Drassal, Allan Cc: U-Boot Mailing List Subject: Re: [U-Boot] U-Boot for MIPS AR7161 Greetings In general that's the last variant http://dioptimizer.narod.ru/files/ap96/u-boot.bin (160 Kb) It is advisable to flash original bootloader, and only then something is seriously flash on the router. If something does not work, see the file: ap96/boot/u-boot/include/configs/ap96.h (here the main SETUP platform) How to compile the source code: 1. Extract the archive to the rights 2. Go to the folder ./build 3. Run "make BOARD_TYPE=ap96 uboot" After build, compiled variants of uoot's will be in: ./ap96/boot/u-boot/ (elf, bin, srec, etc. format) and ./images/ap96/ (only bin format) http://www.mediafire.com/?5rljo2y95dypd8z (109 Mb) P.S. Notify, wakes it work "flinfo" for the second bank of flash memory. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
