Hello Kim, Kim Phillips wrote: > On Wed, 11 Feb 2009 19:26:27 +0100 > Heiko Schocher <h...@denx.de> wrote: > >> add CONFIG_BOUTCOUNT_LIMIT feature for 8360 CPU. > > s/BOUT/BOOT/
Ups, I fix it. >> The bootcounter uses 8 bytes from the muram, >> because no other memory was found on this >> CPU for the bootcount feature. So we must >> correct the muram size in DTS before booting >> Linux. >> >> This feature is actual only implemented for >> MPC8360, because not all 83xx CPU have qe, >> and therefor no muram, which this feature > > therefore I fix this, too. >> uses. >> >> This patch also activate this option for >> the kmeter1 board. > > not that I really like enabling this by default, but this patch doesn't > do what you say it does in this last paragraph here (that I can see at Yes, you are right, this is enabled by patch 10/12 in the common config file for all keymile boards. I remove this from the commit message. > least). Can you either rm this paragraph (preferred :) or actually add > BOOTCOUNT_LIMIT to the board's config? Btw, what's the rationale for > enabling this by default, and for this board? The hardware manufacturer wants to use this feature, see: http://www.denx.de/wiki/DULG/UBootBootCountLimit This board (btw, all keymile boards) uses this feature, so it should be enabled. bye Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
