Hi Wolfgang, 2009/2/9 Wolfgang Denk <w...@denx.de>: > Dear Magnus Lilja, > > In message <1219998982-21289-4-git-send-email-lilja.mag...@gmail.com> you > wrote: >> Add support for the Freescale i.MX31 PDK (a.k.a 3DS) board. Ethernet and >> MC13873 RTC support is enabled by this patch. >> >> Booting from NAND is not supported yet so U-boot relies on some other >> initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM. >> >> Signed-off-by: Magnus Lilja <lilja.mag...@gmail.com> >> --- >> MAKEALL | 1 + >> Makefile | 3 + >> board/freescale/mx31pdk/Makefile | 53 ++++++++++ >> board/freescale/mx31pdk/config.mk | 1 + >> board/freescale/mx31pdk/lowlevel_init.S | 30 ++++++ >> board/freescale/mx31pdk/mx31pdk.c | 76 +++++++++++++++ >> board/freescale/mx31pdk/u-boot.lds | 59 ++++++++++++ >> include/configs/mx31pdk.h | 159 >> +++++++++++++++++++++++++++++++ >> 8 files changed, 382 insertions(+), 0 deletions(-) > > I still have these patches marked as open in my list, but they > probably need rebasing now anyway. > > Is it OK that I mark these patches as done?
Not sure what you mean by "done", but I'm planning to rebase and re-submit once Maxim's patch for NAND-SPL boot for i.MX31 has been merged into the tree. Best Regards, Magnus _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
