Dear Magnus Lilja, In message <1219998982-21289-4-git-send-email-lilja.mag...@gmail.com> you wrote: > Add support for the Freescale i.MX31 PDK (a.k.a 3DS) board. Ethernet and > MC13873 RTC support is enabled by this patch. > > Booting from NAND is not supported yet so U-boot relies on some other > initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM. > > Signed-off-by: Magnus Lilja <lilja.mag...@gmail.com> > --- > MAKEALL | 1 + > Makefile | 3 + > board/freescale/mx31pdk/Makefile | 53 ++++++++++ > board/freescale/mx31pdk/config.mk | 1 + > board/freescale/mx31pdk/lowlevel_init.S | 30 ++++++ > board/freescale/mx31pdk/mx31pdk.c | 76 +++++++++++++++ > board/freescale/mx31pdk/u-boot.lds | 59 ++++++++++++ > include/configs/mx31pdk.h | 159 > +++++++++++++++++++++++++++++++ > 8 files changed, 382 insertions(+), 0 deletions(-)
I still have these patches marked as open in my list, but they probably need rebasing now anyway. Is it OK that I mark these patches as done? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Vor allem kein Gedanke! Nichts ist kompromittierender als ein Gedan- ke! - Friedrich Wilhelm Nietzsche _Der Fall Wagner_ (1888) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
