Ron Madrid wrote:
> This patch adjusts the LED control so that interrupt lines are not reading
> LEDs
> and effectively causing indefinite interrupts to the controller.
>
> Signed-off-by: Ron Madrid <ron_mad...@sbcglobal.net>
> ---
> drivers/net/tsec.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
> index d7da081..c9aa29d 100644
> --- a/drivers/net/tsec.c
> +++ b/drivers/net/tsec.c
> @@ -1141,6 +1141,9 @@ struct phy_info phy_info_M88E1118 = {
> {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> {0x16, 0x0002, NULL}, /* Change Page Number */
> {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
> + {0x16, 0x0003, NULL}, /* Change Page Number */
> + {0x10, 0x021e, NULL}, /* Adjust LED control */
> + {0x16, 0x0000, NULL}, /* Change Page Number */
> {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> @@ -1152,6 +1155,7 @@ struct phy_info phy_info_M88E1118 = {
> /* Status is read once to clear old link state */
> {MIIM_STATUS, miim_read, NULL},
> /* Auto-negotiate */
> + {MIIM_STATUS, miim_read, &mii_parse_sr},
> /* Read the status */
> {MIIM_88E1011_PHY_STATUS, miim_read,
> &mii_parse_88E1011_psr},
>
Applied to net repo.
thanks,
Ben
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
