This patch adjusts the LED control so that interrupt lines are not reading LEDs
and effectively causing indefinite interrupts to the controller.
Signed-off-by: Ron Madrid <ron_mad...@sbcglobal.net>
---
drivers/net/tsec.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index d7da081..c9aa29d 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -1141,6 +1141,9 @@ struct phy_info phy_info_M88E1118 = {
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
{0x16, 0x0002, NULL}, /* Change Page Number */
{0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
+ {0x16, 0x0003, NULL}, /* Change Page Number */
+ {0x10, 0x021e, NULL}, /* Adjust LED control */
+ {0x16, 0x0000, NULL}, /* Change Page Number */
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
@@ -1152,6 +1155,7 @@ struct phy_info phy_info_M88E1118 = {
/* Status is read once to clear old link state */
{MIIM_STATUS, miim_read, NULL},
/* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
/* Read the status */
{MIIM_88E1011_PHY_STATUS, miim_read,
&mii_parse_88E1011_psr},
--
1.5.5.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
