Hello, 2009/1/14 Paal Bakken <pabak...@online.no>: > I have problems with usb mass storage in u-boot. > We have our own at91sam9263 board, but I experience exactly the same problems > on the standard at91sam9263ek. And the usb-port AND memory stick works fine > in linux. I have tried both FAT and FAT32. Below follows an edited screendump > of some usb commands with a u-boot snapshot version from 13.01.2009.
The current version should work, indeed a lot has been done in that area for these cores. However, IIRC there were some problems with the bootstrap code not initialising the PLLB correctly, which resulted in similar errors. I thought that Stelian got it to work finally on this particular core as well, so maybe he can confirm this. (I concentrated the patches on the sam9261) Kind Regards, Remy > (Re)start USB... > USB: scanning bus for devices... 2 USB Device(s) found > scanning bus for storage devices... ERROR: USB-error: STALL: TD was > moved to the Done Queue because the endpoint returned a STALL PID (4) > ERROR: USB-error: STALL: TD was moved to the Done Queue because the endpoint > returned a STALL PID (4) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > : > 225 more of the same error? :-) > : > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) Device NOT ready > Request Sense returned 00 00 00 > 1 Storage Device(s) found > > DUnf-Boot2009> usb tree > > Device Tree: > 1 Hub (12MBit/s, 0mA) > | OHCI Root Hub > | > |?-2 Mass Storage (12MBit/s, 100mA) > TTI-MSA USB 2.0 Mobile Disk FF04091900068 > > DUnf-Boot2009> usb info > > 1: Hub, USB Revision 1.10 > - OHCI Root Hub > - Class: Hub > - PacketSize: 8 Configurations: 1 > - Vendor: 0x0000 Product 0x0000 Version 0.0 > Configuration: 1 > - Interfaces: 1 Self Powered 0mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms > > 2: Mass Storage, USB Revision 2.0 > - TTI-MSA USB 2.0 Mobile Disk FF04091900068 > - Class: (from Interface) Mass Storage > - PacketSize: 64 Configurations: 1 > - Vendor: 0x126f Product 0x1325 Version 1.0 > Configuration: 1 > - Interfaces: 1 Bus Powered 100mA > - ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token > (IN) or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > > Interface: 0 > - Alternate Setting 0, Endpoints: 3 > - Class Mass Storage, Transp. SCSI, Bulk only > - ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token > (IN) or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) > or did not provide a handshake (OUT) (5) > > - Endpoint 1 In Bulk MaxPacket 64 > - Endpoint 2 Out Bulk MaxPacket 64 > - Endpoint 3 In Interrupt MaxPacket 2 Interval 1ms > > DUnf-Boot2009> usb storage > Device 0: Vendor: Rev: Prod: > Type: Removable Hard Disk > Capacity: not available > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
