The clock divider for the MPC8568 local bus should be doubled, like the
other newer MPC85xx chips.
Since there are now more chips with a 2x divider than a 1x, and any new
85xx chips will probably be 2x, invert the sense of the #if so that it
lists the 1x chips instead of the 2x ones.
Signed-off-by: Trent Piepho <[EMAIL PROTECTED]>
Acked-by: Kumar Gala <[EMAIL PROTECTED]>
Acked-by: Jon Loeliger <[EMAIL PROTECTED]>
---
cpu/mpc85xx/cpu.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 59a9ac8..89800b8 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -176,8 +176,8 @@ int checkcpu (void)
#endif
clkdiv = lcrr & LCRR_CLKDIV;
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
- defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536)
+#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
+ !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider values.
--
1.5.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
