Dear Pink Boy,
In message <[EMAIL PROTECTED]> you wrote:
>
> I built u-boot 1.3.4 for the AT91RM9200DK and was able to hack in
> support for the flash chip I'm using. You might try the same.
>
> The setup I'm using is to store boot.bin from atmel in flash
> at . And a copy of u-boot.gz at 10010000.
This is not needed. U-Boot can boot from NOR directly, without need
for boot.bin.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
The C-shell doesn't parse. It adhoculates.
- [EMAIL PROTECTED] in <[EMAIL PROTECTED]>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
