Dear "Alan Carvalho de Assis", In message <[EMAIL PROTECTED]> you wrote: > This code is executed from internal 2KB NAND Flash Controller RAM buffer > and will copy the remaining U-Boot code from NAND Flash verifying its > bad blocks (case it exists). > > Signed-off-by: Alan Carvalho de Assis <[EMAIL PROTECTED]> > --- > cpu/arm1136/mx31/Makefile | 2 + > cpu/arm1136/mx31/nand_copy.S | 263 > +++++++++++++++++++++++++++++++++ > include/asm-arm/arch-mx31/mx31-regs.h | 69 +++++++++ > 3 files changed, 334 insertions(+), 0 deletions(-) > create mode 100644 cpu/arm1136/mx31/nand_copy.S
NAK. All this should be in nand_spl/, I think. Scott, am I right? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "Language shapes the way we think, and determines what we can think about." - B. L. Whorf _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
