> > board/xes/common/fsl_8572_clk.c | 51 +++
> > board/xes/common/fsl_85xx_ddr.c | 93 ++++++
> > board/xes/common/fsl_85xx_pci.c | 287 +++++++++++++++++
>
>
> Could you take a look at the new PCI code Kumar submitted (which I
> just applied), and rework the board code to imitate that code (it
> should be a trivial change, but one that makes things cleaner)
>
> > + /* Invalidate flash region */
> > + for (i = 0; i < 256 * 1024 * 1024; i += 32) {
> > + asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
> > + asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
> > + }
>
>
> Take a look at the current 8572DS code for doing this. By mapping
> things correctly, you can use dcbf, and not have to go through the
> entire memory space of your flash.
>
Thanks for the comments Andy. I'll make the changes you referenced as
well as a tiny bit of aesthetic cleanup to XPEDITE5370.h and resubmit on
Monday.
Peter
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
