Hello Tom
Sorry for the late late reply, but you mail was hidden in my inbox.
I have been the developer of the avnet v5fx30eval patch for u-boot. I
have that board correctly running linux 2.6.27 from the latest paulus
git patch. In order to use the ll_temac I have used a modified
version of the xilinx driver.
On the final design I am running this command to run linux: "bootm
0xff200000 0xff9a0000 0xff7e0000 " Try placing your data on that
areas.
If you need more info please ask
Best regards
BTW: Please add me to the cc next time.
On Thu, Oct 9, 2008 at 15:35, Curran, Tom <[EMAIL PROTECTED]> wrote:
> I am using u-boot on the Avnet V5FX30T (Xilinx FPGA, PPC440) eval board
> to boot a Linux 2.6.27-rc4 kernel. I can use u-boot to tftp the kernel,
> ramdisk, and device tree blob to RAM and boot from there OK. I copied
> the kernel, ramdisk and blob to flash and verified those elements were
> programmed in flash correctly with 'iminfo', but when I try to boot from
> flash the boot process hangs at "Loading Ramdisk to 03d59000, end
> 03ec8f20 ... OK". At this point u-boot will restart (after a
> WDT-induced reset?) after a few minutes. Interestingly enough, I can
> boot from flash IF the ramdisk is already in RAM with a "bootm
> $(kernel_flash_addr) $(ramdisk_ram_addr) $(blob_flash_addr)". This
> leads me to believe something is going wrong in the copying of the
> ramdisk from flash to RAM. Perhaps I am doing something wrong or missed
> a step somewhere? I have read the FAQ, but have not found anything
> relevant. Perhaps someone here has had this problem too and can offer a
> solution? Any help is appreciated. Many thanks in advance!
>
> --Tom
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
Ricardo Ribalda
http://www.eps.uam.es/~rribalda/
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
