>>>> thanks. How did you do the measurements that got you this 1.5x >>>> factor? >>> >>> This afternoon I re-measured the I2C bus clock frequency with the >>> oscilloscope at the I2C clock line on our Socrates MPC8544 board. >>> With >>> the patch applied, I measured the correct frequency of 100 kHz. >>> Without, >>> it was a factor of 1.5 too high. >> >> are you able to change cfg_seq_freq on the board? > > At least I don't know how. It's defined via hardware strap, I imagine.
Its is.. not sure if you have schematics for the board. If you do look to see if LWE_B is wired to anything. - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
