Josh,
On Thursday 09 October 2008, Josh Boyer wrote:
> The lib_ppc/board.c file will fill in the bi_opbfreq variable
> in the bd_t structure for PowerPC 4xx platforms. However, it
> currently seems to be coupled together with the bi_pci_busfreq
> variable under a series of ifdefs for particular CPU types.
> As a result, it is rather easy to miss getting bi_opbfreq
> populated on boards when doing a board port. This is the
> case for CONFIG_405EZ for example.
>
> This patch introduces a CONFIG_4xx_HAS_OPB option that is
> set to indicate that the platform uses that variable in the
> bd_t structure. It decouples this from the PCI bus setting
> and sets is properly for CPUs that have this defined.
I thought about it a little more. Some comments below...
> Signed-off-by: Josh Boyer <[EMAIL PROTECTED]>
>
> diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
> index 54ac01d..6673cd4 100644
> --- a/include/asm-ppc/u-boot.h
> +++ b/include/asm-ppc/u-boot.h
> @@ -112,12 +112,14 @@ typedef struct bd_info {
> unsigned char bi_enet3addr[6];
> #endif
>
> +#if defined(CONFIG_4xx_HAS_OPB)
> + unsigned int bi_opbfreq; /* OPB clock in Hz */
> +#endif
It just occurred to me that this change break Linux compatibility. Usually you
can just copy this file to the include/asm-ppc directory in Linux to have the
same bd_info as in U-Boot (that's old arch/ppc of course). But Linux doesn't
know about this CONFIG_4xx_HAS_OPB define. So this will not work.
You should probably better leave this file untouched as the 405EZ is correct.
> #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
> defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
> defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
> defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
> defined(CONFIG_460EX) || defined(CONFIG_460GT)
> - unsigned int bi_opbfreq; /* OPB clock in Hz */
> int bi_iic_fast[2]; /* Use fast i2c mode */
> #endif
> #if defined(CONFIG_NX823)
> diff --git a/include/ppc4xx.h b/include/ppc4xx.h
> index e216663..be6696d 100644
> --- a/include/ppc4xx.h
> +++ b/include/ppc4xx.h
> @@ -46,6 +46,15 @@
> #define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
> #endif
>
> +/* Configure the OPB variable */
> +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
> + defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
> + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
> + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
> + defined(CONFIG_460EX) || defined(CONFIG_460GT)
> +#define CONFIG_4xx_HAS_OPB
> +#endif
Hmmm. Why not something like this:
#if !defined(CONFIG_XILINX_405) && !defined(CONFIG_XILINX_440)
#define CONFIG_4xx_HAS_OPB
#endif
Does this work?
> +
> /* PLB4 CrossBar Arbiter Core supported across PPC4xx families */
> #if defined(CONFIG_405EX) || \
> defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
> diff --git a/lib_ppc/board.c b/lib_ppc/board.c
> index c02ac62..977fc19 100644
> --- a/lib_ppc/board.c
> +++ b/lib_ppc/board.c
> @@ -611,10 +611,12 @@ void board_init_f (ulong bootflag)
> defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
> defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
> bd->bi_pci_busfreq = get_PCI_freq ();
> - bd->bi_opbfreq = get_OPB_freq ();
> #elif defined(CONFIG_XILINX_405)
> bd->bi_pci_busfreq = get_PCI_freq ();
> #endif
> +#if defined(CONFIG_4xx_HAS_OPB)
> + bd->bi_opbfreq = get_OPB_freq ();
> +#endif
> #endif
>
> debug ("New Stack Pointer is: %08lx\n", addr_sp);
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED]
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
