Hi Jeff, On Monday 25 August 2008, [EMAIL PROTECTED] wrote: > I found the issue... it is with the NAND image (NUB). The NUB destination > address is the TEXT_BASE address defined in the top level Makefile > > The SPL loads the NUB, and then the NUB relocates itself to the top of > RAM (at 0xFF23000 in my case). This relocation fixes the Global table, > but the tables for the iminfo command contain pointers to strings for > the OS, ARCH, type etc. These string pointer all point back to the NUB > TEXT_BASE address, which was set to 0x1000000 (16MB).
I just checked this issue on a NAND booting Canyonlands (460EX) board. I added some debug code to print the "uimage_os" pointer from common/image.c. On my target this pointer is relocated to the end of SDRAM too. So it's not pointing to the NUB TEXT_BASE. Are you sure that those string pointer are incorrect in your case? Perhaps some other pointers or functions pointer are not relocated correctly. > When downloading > an image > 16MB to 0x200000, it overwrites the original image. I > thought all the strings would be relative at this location, but the > string pointers are global addresses. I relocated the NUB dest address to > higher in RAM for now to get around the issue. > > The easiest way around this I believe is to hard code a location for the > SPL to load the NUB to and then not relocate the NUB. We don't really want to go this way. Biggest problem would be that we would loose the ability to run with different memory size configurations. And if we really have some relocation problems (which is very likely), then they will hit us in the non NAND-booting case too. So all boards ports that relocate will have those problems and they should be solved at the root. > I thought I remembered something about some strings being accessed from the > original location of the UBoot image. It would be great if you could test a little more and let us know where exactly the relocation problem lies. As mentioned above the string pointers from image.c should be fine. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
