Hello Grant! On Tue, 2008-08-26 at 12:12 -0700, Grant Erickson wrote: > Are ports 8/9 truly "unmanaged" or are they like ports 4/5 on the M88E6061 > in which the ports have MDIO/MII interfaces but do not follow IEEE register > conventions?
> If the former, then I think it is better to just pull the speed and duplex > settings from the switch and pass them up to the 4xx Ethernet driver. In my > situation, I did as shown below. It is likely more invasive than your > approach; however, it ensures that software follows what the hardware is > strapped to. Yes! It's possible to determine the speed and duplex mode (it's even possible to set the duplex mode, speed is read only). I'll test that tomorrow. Thanks a lot, Wolfgang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
