Any document on how to use usbtty? I have a USB-RS232 cable to convert the USB port into a RS232 port. Do I need any driver? What environment variable shall I set?
wd wrote: > > In message <[EMAIL PROTECTED]> you wrote: >> becides set CONFIG_USB_TTY, what other modification need to do for the >> usbtty support? > > You will probably have to adapt "drivers/usbtty.c"; so far it's > pretty omap1510-specifc. Also, you may have to write your own USB bus > interface driver (see drivers/usbdcore_omap1510.c). > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] > "No matter where you go, there you are..." - Buckaroo Banzai > > > ------------------------------------------------------- > SF.Net email is sponsored by: > Tame your development challenges with Apache's Geronimo App Server. > Download > it for free - -and be entered to win a 42" plasma tv or your very own > Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php > _______________________________________________ > U-Boot-Users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > -- View this message in context: http://www.nabble.com/how-to-support-usbtty-tp936753p19167791.html Sent from the Uboot - Users mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
