Tested with TQM5200S on STK52XX.200 Board
Signed-off-by: Axel Beierlein <[EMAIL PROTECTED]>
---
cpu/mpc5xxx/cpu.c | 20 ++++++++++++++++++++
include/configs/TQM5200.h | 1 +
include/mpc5xxx.h | 1 +
3 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index ace1653..d87f42c 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -135,3 +135,23 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#endif
}
#endif
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr = (volatile ulong *)(MPC5XXX_CDM_BRDCRMB);
+
+ *save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | a;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr = (volatile ulong *)(MPC5XXX_CDM_BRDCRMB);
+
+ if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
+ return 0;
+ else
+ return (*save_addr & 0x0000ffff);
+}
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index bfb478a..5fb5f80 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -55,6 +55,7 @@
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1
*/
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps
*/
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_BOOTCOUNT_LIMIT 1
#ifdef CONFIG_FO300
#define CFG_DEVICE_NULLDEV 1 /* enable null device */
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 5d11ef0..0f5bee5 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -137,6 +137,7 @@
/* Clock Distribution Module */
#define MPC5XXX_CDM_JTAGID (MPC5XXX_CDM + 0x0000)
#define MPC5XXX_CDM_PORCFG (MPC5XXX_CDM + 0x0004)
+#define MPC5XXX_CDM_BRDCRMB (MPC5XXX_CDM + 0x0008)
#define MPC5XXX_CDM_CFG (MPC5XXX_CDM + 0x000c)
#define MPC5XXX_CDM_48_FDC (MPC5XXX_CDM + 0x0010)
#define MPC5XXX_CDM_SRESET (MPC5XXX_CDM + 0x0020)
--
1.5.4.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
