Dear [EMAIL PROTECTED],
In message <[EMAIL PROTECTED]> you wrote:
> From: Prodyut Hazarika <[EMAIL PROTECTED]>
>
> Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
> across processors
> Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX processors
>
> Signed-off-by: Prodyut Hazarika <[EMAIL PROTECTED]>
> Acked-by: Feng Kan <[EMAIL PROTECTED]>
...
> diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h
> index df787b3..d2e3b42 100644
> --- a/include/asm-ppc/ppc4xx-sdram.h
> +++ b/include/asm-ppc/ppc4xx-sdram.h
> @@ -259,23 +259,39 @@
> /*
> * Memory queue defines
> */
> -#define SDRAMQ_DCR_BASE 0x040
> -
> -#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size
> */
> -#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size
> */
> -#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size
> */
> -#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size
> */
> -#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB
> */
> -#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB
> */
> -#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper
> 32 HB */
> -#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower
> 32 HB */
> -#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address
> upper 32 LL */
> -#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL
> */
> -#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL
> */
> -#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper
> 32 LL */
> -#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower
> 32 LL */
> -#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration
> between paths */
> -#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address
> upper 32 LL */
> +#define SDRAMQ_DCR_BASE 0x040
> +
> +#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address &
> size */
> +#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address &
> size */
> +#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address &
> size */
> +#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address &
> size */
> +#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB
> */
> +#define SDRAM_CONF1HB_AAFR 0x80000000 /* Address Ack on First
> Request - Bit 0 */
> +#define SDRAM_CONF1HB_PRPD 0x00080000 /* PLB Read pipeline Disable
> - Bit 12 */
> +#define SDRAM_CONF1HB_PWPD 0x00040000 /* PLB Write pipeline
> Disable - Bit 13 */
> +#define SDRAM_CONF1HB_PRW 0x00020000 /* PLB Read Wait - Bit 14 */
> +#define SDRAM_CONF1HB_RPEN 0x00000800 /* Read Passing Enable - Bit
> 20 */
> +#define SDRAM_CONF1HB_RFTE 0x00000400 /* Read Flow Through Enable
> - Bit 21 */
NAK again. Please do not replace the TAB characters in the original
code by spaces. Use TAB for vertical alignment. At least do not make
existing code worse.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
As far as we know, our computer has never had an undetected error.
-- Weisert
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
