Hello Allan, I'm not sure whether this property is available in the version you are currently using, in latest ICS V6 the client has a property "RcvSize" that is used to size the receive buffer and also determines the file read block size, default value is 2048. What happens when you increase this value? For instance in 1024 bytes steps up to 8096?
-- Arno Garrels [TeamICS] http://www.overbyte.be/eng/overbyte/teamics.html Fernandes wrote: > Hi , > > I have been successfully using TFTPServer + TFTPClient combination > with good results. Now my need is to send data to a machine that has > a NAS drive mapped onto it. Here the speed falls drastically. > > I have tried the following: > > 1) BulletProof FTP Server with mapped NAS as destination + > WS_FTP Client, Combination transfers 10 seconds > > 2) ICS Sample FTP_Server with local drive as destination + > FTP Tst as Client 7 seconds > > 3) ICS Sample FTP_Server with mapped NAS as destination + > FTP Tst as Client slows down Speed (53 seconds) > > > Below are the screens from the ICS sample programs > > Please advice > > Thanks > Allan > > > FTP Server Slow (NAS) > ********************* > FtpServer (c) 1998-2005 F. Piette V1.06 > Using: > TWSocket (c) 1996-2005 Francois Piette V5.18 > TFtpServer (c) 1998-2005 F. Piette V1.42 > Winsock: > Version 2.2 > WinSock 2.0 > Running > ! Server started > ! 10.10.10.191 connected > < 10.10.10.191 USER NAS_Test >> 10.10.10.191 331 Password required for NAS_Test. > < 10.10.10.191 PASS abcd > ! 10.10.10.191 User 'NAS_Test' is authenticated >> 10.10.10.191 230 User NAS_Test logged in. > < 10.10.10.191 PORT 10,10,10,191,5,5 >> 10.10.10.191 200 Port command successful. > < 10.10.10.191 STOR e:\a\a.zip >> 10.10.10.191 150 Opening data connection for e:\a\a.zip. >> 10.10.10.191 226 File received ok > > > FTP Server fast (Local) > *********************** > FtpServer (c) 1998-2005 F. Piette V1.06 > Using: > TWSocket (c) 1996-2005 Francois Piette V5.18 > TFtpServer (c) 1998-2005 F. Piette V1.42 > Winsock: > Version 2.2 > WinSock 2.0 > Running > ! Server started > ! 10.10.10.191 connected > < 10.10.10.191 USER NAS_Test >> 10.10.10.191 331 Password required for NAS_Test. > < 10.10.10.191 PASS abcd > ! 10.10.10.191 User 'NAS_Test' is authenticated >> 10.10.10.191 230 User NAS_Test logged in. > < 10.10.10.191 PORT 10,10,10,191,5,7 >> 10.10.10.191 200 Port command successful. > < 10.10.10.191 STOR d:\dsafe\a.zip >> 10.10.10.191 150 Opening data connection for d:\dsafe\a.zip. >> 10.10.10.191 226 File received ok > > > > FTPTst Slow (NAS) > ****************** > Winsock version 2.2 > WinSock 2.0 > Running > Executing Requested Command > < 220-Welcome to my Server > < 220- > < 220 ICS FTP Server ready. > Session Connected, error = 0 > Request 1 Done. > StatusCode = 220 > LastResponse was : '220 ICS FTP Server ready.' > No error > Executing Requested Command >> USER NAS_Test > < 331 Password required for NAS_Test. > Request 2 Done. > StatusCode = 331 > LastResponse was : '331 Password required for NAS_Test.' > No error > Executing Requested Command >> PASS abcd > < 230 User NAS_Test logged in. > Request 3 Done. > StatusCode = 230 > LastResponse was : '230 User NAS_Test logged in.' > No error > Executing Requested Command >> PORT 10,10,10,191,5,5 > < 200 Port command successful. >> STOR e:\a\a.zip > < 150 Opening data connection for e:\a\a.zip. > < 226 File received ok > ! 56896928 bytes received/sent in 53 seconds (1066000 Bytes/sec) > Request 18 Done. > StatusCode = 226 > LastResponse was : '226 File received ok' > No error > > > > FTP Tst Fast (Local) > ******************** > Winsock version 2.2 > WinSock 2.0 > Running > Executing Requested Command > < 220-Welcome to my Server > < 220- > < 220 ICS FTP Server ready. > Session Connected, error = 0 > Request 1 Done. > StatusCode = 220 > LastResponse was : '220 ICS FTP Server ready.' > No error > Executing Requested Command >> USER NAS_Test > < 331 Password required for NAS_Test. > Request 2 Done. > StatusCode = 331 > LastResponse was : '331 Password required for NAS_Test.' > No error > Executing Requested Command >> PASS abcd > < 230 User NAS_Test logged in. > Request 3 Done. > StatusCode = 230 > LastResponse was : '230 User NAS_Test logged in.' > No error > Executing Requested Command >> PORT 10,10,10,191,5,7 > < 200 Port command successful. >> STOR d:\dsafe\a.zip > < 150 Opening data connection for d:\dsafe\a.zip. > < 226 File received ok > ! 56896928 bytes received/sent in 7 seconds (7915000 Bytes/sec) > Request 18 Done. > StatusCode = 226 > LastResponse was : '226 File received ok' > No error > ************************************************************ > > > > __________________________________________________________ > Not happy with your email address?. > Get the one you really want - millions of new email addresses > available now at Yahoo! http://uk.docs.yahoo.com/ymail/new.html -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
