Patrick Schmidt - STEP Software GmbH wrote: >> Later you change to that directory and request a dir list. The server >> somewhat hang creating the directory list. After 2 minutes the >> connection is >> closed (probably an inactivity timeout at server side). > After this time (and error-message) the client gets the list and > loads every file in the list! > That's strange...
I bet the delay starts after the server called Data.ShutDown(1) in FtpSrv.pas, TFtpServer.WMFtpSrvCloseData, can you please set a breakpoint there and check whether that this is true? -- Arno Garrels [TeamICS] http://www.overbyte.be/eng/overbyte/teamics.html > >> Try with passive mode. > Passive mode is not possible, my client is a (Hardware-)Lighting- > console. The only options to configure in console are: IP, user, pw > and a directory > >> Can you reproduce this behaviour using another FTP client software >> using the >> same conditions ? > No, only this combination. If I try other client (eg Filezilla) it > works and if i try other > server (G6 FTP Server) with the console it works, too! :-( > > best regards > Patrick Schmidt > > ----- Original Message ----- > From: "Francois PIETTE" <[EMAIL PROTECTED]> > To: "ICS support mailing" <twsocket@elists.org> > Sent: Wednesday, April 18, 2007 4:20 PM > Subject: Re: [twsocket] 501 Cannot RETR. Error - Socket with > icsFtpServ (V6forDelphi7) > > >>> My FTP-Client send a "LIST" which is not handled correctly. After >>> the "LIST" >>> it takes about 2 minutes until the error is displayed and after >>> that the client >>> gets the direcory listing. >>> Answer to client: 550 'F:\PROJ\grandMA ftp\slp': can't create >>> directory. >> >> You are creating a directory and you don't have permission. Maybe >> already exists. Should not be the problem. >> >>> ! Answer to client: 150 Opening data connection for directory list. >>> !!! Here the communication hang for nearly 2 minutes !!! >>> ! Answer to client: 501 Cannot RETR. Error - Socket is not connected >> >> Later you change to that directory and request a dir list. The server >> somewhat hang creating the directory list. After 2 minutes the >> connection is >> closed (probably an inactivity timeout at server side). >> >> Try with passive mode. >> >> Can you reproduce this behaviour using another FTP client software >> using the >> same conditions ? >> >> >> -- >> Contribute to the SSL Effort. Visit >> http://www.overbyte.be/eng/ssl.html -- >> [EMAIL PROTECTED] >> http://www.overbyte.be >> >> >> >> ----- Original Message ----- >> From: "Patrick Schmidt - STEP Software GmbH" <[EMAIL PROTECTED]> >> To: <twsocket@elists.org> >> Sent: Wednesday, April 18, 2007 4:08 PM >> Subject: [twsocket] 501 Cannot RETR. Error - Socket with icsFtpServ >> (V6 forDelphi7) >> >> >>> STEP >>> My FTP-Client send a "LIST" which is not handled correctly. After >>> the "LIST" >>> it >>> takes about 2 minutes until the error is displayed and after that >>> the client >>> gets >>> the direcory listing. >>> >>> See log-file: >>> 192.168.200.167 connected >>> Client-Command: USER MA >>> Answer to client: 331 Password required for MA. >>> Client-Command: PASS ma >>> Login Username:MA Password:ma >>> Answer to client: 230 User MA logged in. >>> Client-Command: TYPE I >>> Answer to client: 200 Type set to I. >>> Client-Command: MKD slp >>> Make Directory: F:\PROJ\grandMA ftp\slp >>> Answer to client: 550 'F:\PROJ\grandMA ftp\slp': can't create >>> directory. Client-Command: CWD slp >>> Change Directory: F:\PROJ\grandMA ftp\slp\ >>> Answer to client: 250 CWD command successful. "F:/PROJ/grandMA >>> ftp/slp/" is >>> current directory. >>> Client-Command: PORT 192,168,200,167,4,205 >>> Answer to client: 200 Port command successful. >>> Client-Command: LIST >>> ! Answer to client: 150 Opening data connection for directory list. >>> !!! Here the communication hang for nearly 2 minutes !!! >>> ! Answer to client: 501 Cannot RETR. Error - Socket is not connected >>> (#10057) >>> >>> best regards >>> Patrick Schmidt >>> >>> -- >>> To unsubscribe or change your settings for TWSocket mailing list >>> please goto http://www.elists.org/mailman/listinfo/twsocket >>> Visit our website at http://www.overbyte.be >> >> -- >> To unsubscribe or change your settings for TWSocket mailing list >> please goto http://www.elists.org/mailman/listinfo/twsocket >> Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
