Patrick Schmidt - STEP Software GmbH wrote: > Passive mode is not possible, my client is a (Hardware-)Lighting- > console. The only options to > configure in console are: IP, user, pw and a directory
Then buy a smarter router ;-) The PORT command sends the private IP of the client which has to be patched to the plublic IP by the the router. Modern routers (even some cheep ones) can do that. -- Arno Garrels [TeamICS] http://www.overbyte.be/eng/overbyte/teamics.html > > best regards > Patrick Schmidt > > ----- Original Message ----- > From: "Fastream Technologies" <[EMAIL PROTECTED]> > To: "ICS support mailing" <twsocket@elists.org> > Sent: Wednesday, April 18, 2007 4:12 PM > Subject: Re: [twsocket] 501 Cannot RETR. Error - Socket with > icsFtpServ (V6forDelphi7) > > >> Try the passive mode. >> >> Regards, >> >> SZ >> >> ----- Original Message ----- >> From: "Patrick Schmidt - STEP Software GmbH" <[EMAIL PROTECTED]> >> To: <twsocket@elists.org> >> Sent: Wednesday, April 18, 2007 5:08 PM >> Subject: [twsocket] 501 Cannot RETR. Error - Socket with icsFtpServ >> (V6 forDelphi7) >> >> >>> STEP >>> My FTP-Client send a "LIST" which is not handled correctly. After >>> the "LIST" >>> it >>> takes about 2 minutes until the error is displayed and after that >>> the client >>> gets >>> the direcory listing. >>> >>> See log-file: >>> 192.168.200.167 connected >>> Client-Command: USER MA >>> Answer to client: 331 Password required for MA. >>> Client-Command: PASS ma >>> Login Username:MA Password:ma >>> Answer to client: 230 User MA logged in. >>> Client-Command: TYPE I >>> Answer to client: 200 Type set to I. >>> Client-Command: MKD slp >>> Make Directory: F:\PROJ\grandMA ftp\slp >>> Answer to client: 550 'F:\PROJ\grandMA ftp\slp': can't create >>> directory. Client-Command: CWD slp >>> Change Directory: F:\PROJ\grandMA ftp\slp\ >>> Answer to client: 250 CWD command successful. "F:/PROJ/grandMA >>> ftp/slp/" is >>> current directory. >>> Client-Command: PORT 192,168,200,167,4,205 >>> Answer to client: 200 Port command successful. >>> Client-Command: LIST >>> ! Answer to client: 150 Opening data connection for directory list. >>> !!! Here the communication hang for nearly 2 minutes !!! >>> ! Answer to client: 501 Cannot RETR. Error - Socket is not connected >>> (#10057) >>> >>> best regards >>> Patrick Schmidt >>> >>> -- >>> To unsubscribe or change your settings for TWSocket mailing list >>> please goto http://www.elists.org/mailman/listinfo/twsocket >>> Visit our website at http://www.overbyte.be >> >> -- >> To unsubscribe or change your settings for TWSocket mailing list >> please goto http://www.elists.org/mailman/listinfo/twsocket >> Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
