Have a look on ebay - rx splitter . http://www.ebay.com/itm/ANTENNA-SPLITTER-COMBINER-RX-HF-1-50-MHz-SO-239-conn ectors-/321217220222?pt=US_Radio_Comm_Antennas&hash=item4aca09ce7e
>> On 3/13/2014 9:13 PM, Gary K9GS wrote: >>> Can anyone point me to a design for a splitter for sharing a Beverage >>> antenna between two receivers? This is for Field Day so these are not >>> optimized Beverages by any means. >>> >>> Just want to allow the 80/40M stations to share antennas. Nothing fancy. >>> >>> My thoughts are to just use a CATV "2-Way" splitter at the output of the >>> Beverage matching transformer and run separate feed-lines to each radio. >>> I'm pretty sure these things work down to 1 MHz but have not measured >>> them. I can use the pre-amp in the radio (K3) to compensate for the >>> loss. >>> >>> Thoughts? >>> _________________ Topband Reflector Archives - http://www.contesting.com/_topband
