OK, going to try tlf (tlf 1.1.0/Ubuntu 10.04LTS) this weekend finally. It is in the :ssb mode. I've played with it in cw for a while so on to ssb. I would prefer to use linux for my shack and move away from windows as much as I can. I have .wav files listed below in the logcfg.dat file. These were used in n1mm and some were added using Sound Recorder in Ubuntu. While I'm not a master of the logcfg or the rules cfg files. 1- How do I play/enable the sound files to send the files to the radio? (F# keys for cw) 2- Is the logcfg.dat info below correct? I am using my sound card and not a voice keyer. 3- For a sound card, should I put the sound paths in the Function key list where the cw info is, in the Alt # keys or is it OK in the VKM# area?
Pressing F1 brings up a GNOME help file, Alt 1 brings up the qso note (Alt n). Thanx, Jim/W3FA ############################### # ARRL DX CONTEST (Stateside) # ############################### # CONTEST=arrldx_usa LOGFILE=arrltest.log CONTEST_MODE # RECALL_MULTS # ################################## # # # Messages F1= to F12= # # Message CW_TU_MSG= # # Message S&P_TU_MSG= # # # # % = call # # @ = hiscall # # # = serial # # [ = RST # # + = increase cw speed # # - = decrease cw speed # # (works only with parport # # interface) # # # ################################## # #F1=TEST % #F2=@ DE % #F3=@ ++5NN--MD #F4=TU 73 #F5= @ #F6=% #F7=@ SRI QSO B4 GL #F8=AGN #F9= ? #F10= QRZ? #F11= PSE K #F12=++++TEST---- % % # CW_TU_MSG=TU % S&P_TU_MSG=TU 5NN MD # #ALT_0= #ALT_1= #ALT_2= #ALT_3= #ALT_4= #ALT_5= #ALT_6= #ALT_7= #ALT_8= #ALT_9= # ################################# # # # Voice Keyer Files # # (F1 to F12) # ################################# # VKM1=/home/jim/tlf/cq.wav (examples...) VKM2=/home/jim/tlf/w3fa.wav VKM3=/home/jim/tlf/rst.wav VKM4=/home/jim/tlf/qsl.wav VKM5=/home/jim/tlf/73.wav VKM6=/home/jim/tlf/call.wav VKM7=/home/jim/tlf/QSOB4.wav VKM8= VKM9=/home/jim/tlf/agn.wav VKM10=/home/jim/tlf/qrz.wav VKM11=/home/jim/tlf/spreturn.wav VKM12=/home/jim/tlf/cq2.wav VKSPR=/home/jim/tlf/spreturn.wav (S&P return message) VKCWR=/home/jim/tlf/qsl.wav (CQ mode return message) # _______________________________________________ Tlf-devel mailing list Tlf-devel@nongnu.org https://lists.nongnu.org/mailman/listinfo/tlf-devel
