Hi,
the error you report in your mail is not abaut MIG but about the
connection between the pc and node.
command you run don't specify how the program have to connect to the ote
so by deafult use a serialForwarder on same machine and port 9002
(sf@localhost:9002).
If the your telosb is connect to your pc you have to use a serial
connection using something like serial@/dev/ttyUSBx:telosb (where
ttyUSBx must taken by motelist command).
try something like:
java net.tinyos.tools.MsgReader BlinkToRadioMsg -comm
serial@/dev/ttyUSB0:telosb
Davide
On 11/10/2013 10:04, pudn jax wrote:
Dear all,
I am very new fly to this tinyos-world.
Since last couple of days i am totally struck on MIG-based
BlinkToRadio application. I want to see the BlinkToRadio packets using
MIG tool. I have followed the all steps from Chapter-4 tinyos 2.x
tutorial. My program is compiling without any errors, as the output is
shown below:
##################################################################################
pudn@BaseUbuntu:~/workspace/BlinkToRadio/src$ make telosb install.1
bsl,/dev/ttyUSB1
mkdir -p build/telosb
compiling BlinkToRadioAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -fnesc-separator=__ -Wall -Wshadow
-Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board=
-DDEFINED_TOS_AM_GROUP=0x22 -I/opt/tinyos-2.1.2/tos/lib/T2Hack
-DIDENT_APPNAME=\"BlinkToRadioApp\" -DIDENT_USERNAME=\"pradeep\"
-DIDENT_HOSTNAME=\"BaseUbuntu\" -DIDENT_USERHASH=0xf6644d2cL
-DIDENT_TIMESTAMP=0x5257ae01L -DIDENT_UIDHASH=0x83dd5596L
BlinkToRadioAppC.nc -lm
/opt/tinyos-2.1.2/tos/chips/cc2420/lpl/DummyLplC.nc:39:2: warning:
#warning "*** LOW POWER COMMUNICATIONS DISABLED ***"
compiled BlinkToRadioAppC to build/telosb/main.exe
11300 bytes in ROM
358 bytes in RAM
msp430-objcopy --output-target=ihex build/telosb/main.exe
build/telosb/main.ihex
writing TOS image
tos-set-symbols --objcopy msp430-objcopy --objdump msp430-objdump
--target ihex build/telosb/main.ihex build/telosb/main.ihex.out-1
TOS_NODE_ID=1 ActiveMessageAddressC__addr=1
installing telosb binary using bsl
tos-bsl --telosb -c /dev/ttyUSB1 -r -e -I -p build/telosb/main.ihex.out-1
MSP430 Bootstrap Loader Version: 1.39-goodfet-8
Mass Erase...
Transmit default password ...
Invoking BSL...
Transmit default password ...
Current bootstrap loader version: 1.61 (Device ID: f16c)
Changing baudrate to 38400 ...
Program ...
11414 bytes programmed.
Reset device ...
rm -f build/telosb/main.exe.out-1 build/telosb/main.ihex.out-1
###############################################################################
Whenever, i follow the next step from Tutorial 4 (i.e.,
java.net.tinyos,tools.MsgReader BlinkToRadioMsg), it gives me below
message:
######################################################################
pudn@BaseUbuntu:~/workspace/BlinkToRadio/src$ java
net.tinyos.tools.MsgReader BlinkToRadioMsg
sf@localhost:9002 died - exiting (java.net.ConnectException:
Connection refused
#####################################################################
I would like request anyone who can help me out with this issue, so
that I can see BlinkToRadio results using MIG tool.
Thanks in advance!!!
-JAX
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
