Dear all,
I am very new fly to this tinyos-world.
Since last couple of days i am totally struck on MIG-based BlinkToRadio
application. I want to see the BlinkToRadio packets using MIG tool. I have
followed the all steps from Chapter-4 tinyos 2.x tutorial. My program is
compiling without any errors, as the output is shown below:
##################################################################################
pudn@BaseUbuntu:~/workspace/BlinkToRadio/src$ make telosb install.1
bsl,/dev/ttyUSB1
mkdir -p build/telosb
compiling BlinkToRadioAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -fnesc-separator=__ -Wall -Wshadow
-Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board=
-DDEFINED_TOS_AM_GROUP=0x22 -I/opt/tinyos-2.1.2/tos/lib/T2Hack
-DIDENT_APPNAME=\"BlinkToRadioApp\" -DIDENT_USERNAME=\"pradeep\"
-DIDENT_HOSTNAME=\"BaseUbuntu\" -DIDENT_USERHASH=0xf6644d2cL
-DIDENT_TIMESTAMP=0x5257ae01L -DIDENT_UIDHASH=0x83dd5596L
BlinkToRadioAppC.nc -lm
/opt/tinyos-2.1.2/tos/chips/cc2420/lpl/DummyLplC.nc:39:2: warning: #warning
"*** LOW POWER COMMUNICATIONS DISABLED ***"
compiled BlinkToRadioAppC to build/telosb/main.exe
11300 bytes in ROM
358 bytes in RAM
msp430-objcopy --output-target=ihex build/telosb/main.exe
build/telosb/main.ihex
writing TOS image
tos-set-symbols --objcopy msp430-objcopy --objdump msp430-objdump --target
ihex build/telosb/main.ihex build/telosb/main.ihex.out-1 TOS_NODE_ID=1
ActiveMessageAddressC__addr=1
installing telosb binary using bsl
tos-bsl --telosb -c /dev/ttyUSB1 -r -e -I -p build/telosb/main.ihex.out-1
MSP430 Bootstrap Loader Version: 1.39-goodfet-8
Mass Erase...
Transmit default password ...
Invoking BSL...
Transmit default password ...
Current bootstrap loader version: 1.61 (Device ID: f16c)
Changing baudrate to 38400 ...
Program ...
11414 bytes programmed.
Reset device ...
rm -f build/telosb/main.exe.out-1 build/telosb/main.ihex.out-1
###############################################################################
Whenever, i follow the next step from Tutorial 4 (i.e.,
java.net.tinyos,tools.MsgReader BlinkToRadioMsg), it gives me below message:
######################################################################
pudn@BaseUbuntu:~/workspace/BlinkToRadio/src$ java
net.tinyos.tools.MsgReader BlinkToRadioMsg
sf@localhost:9002 died - exiting (java.net.ConnectException: Connection
refused
#####################################################################
I would like request anyone who can help me out with this issue, so that I
can see BlinkToRadio results using MIG tool.
Thanks in advance!!!
-JAX
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
