Hi,
I’m new of TinyOS and my sensors tmote sky not works.
I used a virtual machine VirtulBox that I took from the web site:
http://systembash.com/content/ubuntos-ubuntu-9-10-tinyos-2-x-virtualbox-image/
On this virtual machine it's installed TinyOS 2.1.0 on Linux Ubuntu 9.10.
---------------------------------------------------------------------------------------
The output of command: [lsb_release -a] is:
---------------------------------------------------------------------------------------
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
---------------------------------------------------------------------------------------
I added some system variables are missing, as shown in some forums, but I
continued to have, according to the directory "/ opt/tinyos-2.x/apps/Blink" and
by running the command [make telosb], the following error message:
---------------------------------------------------------------------------------------
mkdir -p build/telosb
compiling BlinkAppC to a telosb binary
ncc -o build/telosb/main.exe -Os -O -mdisable-hwmul -fnesc-separator=__ -Wall
-Wshadow -Wnesc-all -target=telosb -fnesc-cfile=build/telosb/app.c -board= -
DDEFINED_TOS_AM_GROUP=0x22 -DIDENT_APPNAME=\"BlinkAppC\" -
DIDENT_USERNAME=\"wcu\" -DIDENT_HOSTNAME=\"wcu-desktop\" -
DIDENT_USERHASH=0xae794e66L -
DIDENT_TIMESTAMP=0x51b9d36dL -DIDENT_UIDHASH=0x8982200fL BlinkAppC.nc -lm
msp430-gcc: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.11' not found
(required by msp430-gcc)
make: *** [exe0] Error 1
---------------------------------------------------------------------------------------
When I run the command [make all telosb], I obtained more repeated errors like
the one shown above and the one below:
---------------------------------------------------------------------------------------
make[1]: Entering directory `/opt/tinyos-2.x/apps/Blink'
mkdir -p build/telosa
compiling BlinkAppC to a telosa binary
ncc -o build/telosa/main.exe -Os -O -mdisable-hwmul -fnesc-separator=__ -Wall
-Wshadow -Wnesc-all -target=telosa -fnesc-cfile=build/telosa/app.c -board= -
DDEFINED_TOS_AM_GROUP=0x22 -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"
wcu\" -DIDENT_HOSTNAME=\"wcu-desktop\" -DIDENT_USERHASH=0xae794e66L -
DIDENT_TIMESTAMP=0x51b45afeL -DIDENT_UIDHASH=0x09a6ce2cL BlinkAppC.nc -lm
msp430-gcc: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.11' not found
(required by msp430-gcc)
make[1]: *** [exe0] Error 1
---------------------------------------------------------------------------------------
Then I did the upgrade to the Ubuntu version 10.04.4
---------------------------------------------------------------------------------------
The output of command before the upgrade: [lsb_release -a]:
---------------------------------------------------------------------------------------
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.04.4 LTS
Release: 10.04
Codename: lucid
---------------------------------------------------------------------------------------
and I solved the problems mentioned before.
However, the sensors do not work again: when I launch the command [motelist] I
always get the message: "no device found".
How can I fix it?
Thanks in advance
Please: help me.
Regards,
Alessia
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
